Frigidaire ATF6000ES Front Load Washer "replace shocks loader" Questions

replace all the shocks because if springs are unbroken and in place, they are rarely an issue.. also, do a spin cycle without any clothes and see if unit spins without issues. It should. If it doesn't

I'm replacing worn shock/vibration absorbers/legs on a Bosch WFL 1880 AU 29 Front Loader and I can't free the shock absorbers from the outer plastic drum. They are attached with a white pin that look ...

A broken shock, how to change? I opened the back of my GE front end loader and the shock absorber is broken, how do I get the pins out to change? They have little plastic tabs that need to be pushed ...

Front Loader Model #FWT449G5S00 banging on spin cycle. One bottem shock snapped replaced with new shock kit (twice) still bangs. At first I thought bang ( out of balance problem) was because of the ...

...spin replaced shocks because one was broke be still will not spin if model # starts with 417 replace motor control located at the base of unit. if not 417 please post with model and make of ...

replacing stabilizers i'm not sure what you mean or how to go about this. sorry i am really a newbie to reapairing any problem on a washing machine! well if you have a top loader then one or more of ...

...the shock broke off. Second is check the trap for the water pump, have a towel for the water. The replacement shocks are better........and most front loaders will not spin if the pressure switch is ...

up a lot of water, so try to put in lee close and less heavy close. If this does not help then you might have a problem with the damper shocks (leaking) or springs (broken) if it a front loader washer

loader, but it is only 3 years old and has many good parts. Is there a market for some of these parts or should I just toss it? Thanks! There are two shock absorbers on that model. They are located on

usually have both items with springs on top and shocks on bottom.Open access panels front and top, check for worn/missing/broken springs and shocks that might be leaking fluid.  Replace as needed