Question about Washing Machines
...RUSTY MARK ON REAR OF DRUM WHEN BACK REMOVED, AND WATER LEAK RUSTY WATER. THINK THIS IS THE BEARING- DO I REPLACE REAR DRUM BEARING? COULD I USE THE SEAR SITE - BEARING FOR HPB 145-80? If there is ...
drum produces a rusty scrape noise, almost electric buzz like.However when the machine is switched off and the drum turned by hand no noise is apparent. Any idea, cheers maybe a bra wire stuck between
Question about Frigidaire Washing Machines
rusty stain and the drum does not seem to be excessively loose on its spindle, the noise may be coming from the motor or the pump or from a foreign object inside the machine somewhere. Clonking can be
...rusty/dirty/metallic it may mean the drum bearing is breaking up. Reach inside, grab the drum and see if it rotates roughly or has excessive movement. There may be residue leaking on the floor ...
...drum, on moving large patch of rusty looking oil underneath washer [email protected] I would say its the dampers on the underside of the drum. One or both have failed and need to be ...
Question about Frigidaire Washing Machines
...rusty water residue behind rear drum support on MAH5500BWW front load washer when turning rear drum support a loud popping noise happens. belt slipped off too. the rear bearing is shot, it is beyond ...
Question about Washing Machines
...a dull hacksaw on rusty metal. noise can be heard when rotating by hand,,,,machine will drain Does it make the sound when you turn the drum by hand? It could well be the drum bearings that have
...drum backplate , is there rusty watermarks If there it the centre seal has given up and let water into the bearings, as the water contains soap it washes the grease out and the bearings stick. ...
Question about LG Washing Machines
...and replace the bearings(inside and outside bearings) the inner drum with spider attached already due to broken rusty bolts and the drum shocks. Like I said just the parts would have been about
Question about Fisher and Paykel Washing Machines
...drum by hand and wiped out all wash powder also real loud and moves when on spin cycle help? If it is really loud and noisy when on spin it will almost certainly be worn or rusty bearings. Workshop ...
3,279 questions posted
Usually answered in minutes!
1,146 Questions
974 Questions
650 Questions
256 Questions
168 Questions
