Frigidaire ATF6000ES Front Load Washer "clear code affinity" Questions

Ad

Question about Frigidaire Washing Machines

1 Answer

...Keeps pausing after running a minute or 2 Frigidaire Affinity Washer Error Code E41 = Control board thinks the door switch is open. Usually replacing the door switch fixes and clears the error

Ad

...code comes on and then it turns off. My Fridgidaire Affinity front load washer has a ERR pause and I can't reset it. How do I clear this hold the start and pause cancel buttons down simultaneously ...

Ad

Question about Frigidaire Washing Machines

1 Answer

...E-20 code. The troubleshooting guide helped; however, the code continues to come in. The drain line is clear to the pump, but the pump sounds like it is failing. Guidance, insight,

Question about Frigidaire Washing Machines

1 Answer

...error signal when I pressed start/pause button and cancel at the same time (a suggestion from one of your posts). Clear code, exit mode and start dryer. If problem persists, replace Main Control ...

Question about Frigidaire Washing Machines

1 Answer

...code "EFO' What does that mean? I just spoke with customer support for my Affinity. They told me it was over sudsing (sp?). from using too much soap or not using high efficiency soap. Suggested ...

Question about Frigidaire Washing Machines

1 Answer

...code at all. sounds like the impeller on the drain pump is blocked. Noise could be coins trapped in drum. Check filter thoroughly, if you cannot remove blockage you may have to remove tubes from pump ...

Question about Frigidaire Washing Machines

1 Answer

code saids pau If the PAU error does not clear after properly restarting the washing machine cycle, push "Cancel," then disconnect the power cord. Wait a few minutes and restore power to see if the ...

Question about Frigidaire Washing Machines

2 Answers

...code means that the coin trap/drain pump hose underneath the machine needs cleaned out due to being blocked. Not only coins but lint, fine garmets and more. I can help if you have a clear mind and ...

Question about Washing Machines

1 Answer

code, i can hear water entering, tells me no water. I have checked the valves which are open fully and screens are clear what now? possibly water pressure too low an taking too long , check the filler

Question about Frigidaire Washing Machines

2 Answers

...Affinity ATF6000ES frozen Washer stopped mid-cycle. No buttons work to restart or clear cycle, but pressing any button returns 3 beeps and ERR in the display which alternates with "45", which I ...

Not finding what you are looking for?
Frigidaire ATF6000ES Front Load Washer Logo

3,279 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...