Frigidaire ATF6000ES Front Load Washer "bolts" Questions

Ad

Every time my machine spins the bolt on the drum un loosens and the machine stops spinning help please Purchase Lock tite thread locker. Loosen bolt, apply this stuff on the bolt threads. Then ...

Ad

Question about Washing Machines

3 Answers

shipping bolt installation A total of four shipping bolts need to be installed: two longer ones on the bottom and two shorter ones on the top. Each shipping bolt consists of a metal screw inside a ...

Ad

How do I remove the agitator in a Hoover 500MD machine? Most Hoovers have a 10mm bolt down inside the agitator. Remove the fabric softener dispenser from the top of the agitator, and look down the ...

Can't remove center bolt to get off agitator. Bolt just spins. How do I remove the bolt at the top of the agitator? It seems that the shaft it screws into just turns free and the bolt does not come ...

Question about Maytag Washing Machines

1 Answer

bolt broke on agitator the top portion of agitator where the softner goes wobbled I tried to tighten up and snapped the bolt. If I can extract the bolt can I purchase a replacement bolt? It looks like

Question about Washing Machines

2 Answers

installing transit bolts wd8013c lg im having trouble installing transit bolts to move interstate. advise you take the top off so you can see where the bolts locate Removing the top isn't going to ...

Question about Washing Machines

1 Answer

i have loosened the bolts but when i keep turning the safety bolts they just keep turning and wont come out I take it they are the transport bolts. Remove the top cover and look down the back so you ...

Question about Washing Machines

1 Answer

...bolt to back out. However, the rubber washer is not the only thing to hold the bolt in. When the bolts are installed in the factory (and also replacment bolts from the manufactuer) they come not ...

Question about GE Washing Machines

1 Answer

...Screw where is the ''transport'' screw on my GE front load washer?? The "transport or shipping" bolts are located at the rear panel of the washer. There are four of these bolts used to support

Question about Frigidaire Washing Machines

1 Answer

rotor removal/disassemble the repair manual explains how to disassemble the and remove rotor, however after removing the bolt from spline shaft i am unable to just pull rotor off as explained, ...

Not finding what you are looking for?
Frigidaire ATF6000ES Front Load Washer Logo

3,279 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...