Frigidaire ATF6000ES Front Load Washer "affinity control panel" Questions

Ad

Question about Frigidaire Washing Machines

1 Answer

...panel from frigidaire affinity washer Pull out the detergent drawer, pressing the catch button in the rear of the drawer. There are a couple phillips screws through the panel around the drawer. Take ...

Ad

Question about Frigidaire Washing Machines

1 Answer

...affinity dryer loc LOC is a generic lock code meaning the door was either locked manually or accidentally. Also LOC will lock the control panel and can be manually locked as well. Try to reset the ...

Ad

Question about Frigidaire Washing Machines

1 Answer

...Affinity ATF6000ES1 washing machine How do I remove the front panel to replace the control board? Checked the internet for manuals and found one that had a blowup of the parts sequence. Also found ...

Question about Frigidaire Washing Machines

2 Answers

something in cabinet of washer Did you reconnect the plug(s) for the control panel?  There is a really good video on youtube that shows you how to take the Affinity apart and put it back together

Question about Frigidaire Washing Machines

1 Answer

...Affinity washer quit spinning during the rinse cycle 14 months after we purchased the machine. We checked to make sure ithe drain was clear, and we tried changing the size of the loads. Nothing we ...

Question about Frigidaire Washing Machines

1 Answer

...front panel removal how do i remove front panel to access the pump remove top, remove control panel, then remove door boot, then remove front, i normally tip machine back and access from ...

...Affinity ATF7000E Front Load Washer won't stop spinning with 1 minute on timer- it continues until I hit cancel. I don't like to babysit a machine but have to make sure it ...

Question about Frigidaire Washing Machines

1 Answer

...when we try to start the washer your "control lock" is on, look cllsely at the control panel there should be a button {or 2 butttons} that need to be pressed and held for 3 secs to unlock the

Question about Frigidaire Washing Machines

1 Answer

Control panel turns off and on- no error message Machine runs fine, and then arbitrarily the contol panel doesn't light up at all. It sometimes seems if I push the front in or put pressure on ...

...control panel wiring harness in a Frigidaire affinity dryer Good Morning Friend, I understand you want to know how to reconnect the control panel wiring harness on your Frigidaire Affinity dryer. ...

Not finding what you are looking for?
Frigidaire ATF6000ES Front Load Washer Logo

3,279 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...