Frigidaire FAC107P1A Wall/Window Air Conditioner "plugged gfci" Questions

Ad

Question about GE Heating & Cooling

1 Answer

trip reset when plug in Either your household wiring has inverted hot/neutral or no ground connection, or the GFCI plug on the air conditioner is defective and needs to be replaced. Either way, you ...

Ad

Question about Haier Heating & Cooling

1 Answer

GFCI plug pops when powered. product one year old I have had this happen when the gfci plug gets water in it after running down the chord due to improper balancing of unit upon installation, there may

Ad

GFCI cords on the LG air units that provide heat and Air I tested the outlets at both addreses and the meter reads 220. In one of the addresses the line was a 120 when I tested it and plugged the unit

Question about Heating & Cooling

1 Answer

...capable of handling the rated amperage of the unit. ( I assume this is 120-volt unit) You should replace the wall receptacle with a GFCI receptacle where the unit is plugged in to prevent ...

...plugged it would not work. Have power at the receptical. Changed out the gfci plug on unit still will not work. Got mad and took it back. Bought a GE 24,000 btu. Same problem will not work at all. ...

Question about LG Heating & Cooling

1 Answer

...for any help. Maybe over pulling more amps the the GFCI curcuit can handle. Check all the GFCI plug and verify if there are anything else plugged in. Including hair dryers and / or flat

Question about LG Heating & Cooling

1 Answer

...plugged in. The wire to the 20 amp breaker is sound and the ground is connected. The breaker box is grounded to the power companies line, but there is no ground pole to earth. Can that be tripping ...

Question about Heating & Cooling

1 Answer

Keeps tripping when I plug it in. Either your household wiring is incorrect (likely reversed HOT and NEUTRAL, or open GROUND), or the GFCI plug on the air conditioner has failed. Once you have ...

GE air aconditioner, the digital screen don't have ligth, and the air don't work make sure the gfci plug haws been reset before plugging it into the wall If this has been done then the gfci plug on ...

Question about DeLonghi Heating & Cooling

1 Answer

This is the solution I rec'd earlier re my De Longhi Pinguino AC 10,000 BTU. If you're in San Diego CA could you make a house call to fix my AC by replacing the cord/plug?\r\n The portion of the plug ...

Not finding what you are looking for?
Heating & Cooling Logo

47 questions posted

Ask a Question

Usually answered in minutes!

Top Frigidaire Heating & Cooling Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Are you a Frigidaire Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...