Frigidaire FAC126P1 wall/window Air Conditioner "drill fix" Questions

FAC107P1A Not cooling. Drilled drain hole DRILLED INTO COOLANT LINE WILL NEED TO FIX AND RECHARGE

...in the bottom of the pan NEVER DRILL THE PAN OF THE AC UNIT ! use something to catch the water.. if you drill the unit, you take the chance of hitting one if the AC lines !!! there no fix'n ...

...fix it please. Check the bottom shell of the unit, if you find a clear area where the water pools, get a small drill and drill a couple of holes taking special precaution to avoid any parts on the ...

In drilling out a clogged drain hole, I accidentally drilled into one of the aluminum coil tubes. The puncture is very snall, but nevertheless the gas escaped.What have I got to do to fix this/ Thanks

...fix is to drill a hole in the pan to permit the water to drain from the pan. Be careful as to where the hole is drilled so as to not damage any component of the a/c. I would suggest at least a 1/4 ...

...slide out then look in the back corners for a hole and use a wire to get the hole open...DO NOT run a drill up in there, you will drill a hole in the coil!!! I have fix a few of ...

fix on the spot. 4) lastly ... here is something I've done in the past. If you have the unit out of the window and the cover off - take a look at the fan motor and see if it's possible to take a drill

...to clean all the debris out. Hope this helps Fix Ya up. Drilling a hole will help, but then what ever has stopped up the drain, will stop up your drill hole, and put you right back where we are

...spitting water Easy fix. reposition the unit to where is tilts slightly downwards in the rear so that the water will flow out the back instead of inside. NEVER drill any holes in a window

a small black pipe) has been sheered off so that we can no longer attach the drainage hose. Is it possible to fix it? It may be possible to drill it out and glue a slightly smaller hose up in side it