...rear an air pump. pressure from this is fed to the fuel nozzle. the nozzle is constructed like a venturi tube. as air rushes past the venturi it creartes a suction for the fuel and expels it ...
Question about Heating & Cooling
of pulling fuel out of the tank its blowing air out of the nozzle. Does the nozzle holder work as a venturi some how or if not why do i not have suction out of the fuel nozzle. Anything that sucks air
...about 3.6 lbs of air pressure to pump up fuel to the nozzle from the tank. the nozzle acts like a venturi and creates a suction for the
...compressor that supposed to put out 3.6 psi of air to the fuel nozzle. the fuel nozzle is a venturi type that creates a vacuum across the orifice to suck fuel from the tank. try this site for ...
...off? The air pump on you heater should blow at 3.5 to 4 psi which runs up to the nozzle which is a venturi which sucks the fuel out of the tank. The motor will generally run for 20 to 30 seconds ...
venturi effect and fuel/air mix in the nozzle) The ignitor (glow bar) turns red The photocell starts looking for a flame in the chamber IF the COMPLETE system is performing to factory specs then there
Question about Mr. Heater Heating & Cooling
...and by doing so increase the air pump speed (mounted to the back of the fan motor) this makes the venturi work better and stays running. also we ran it with the motor cover off and it ran for 45
378 questions posted
Usually answered in minutes!
70 Questions
27 Questions
5 Questions
5 Questions
