...SPC 40 forced air propane heater. The thermocouple on it has finally gone bad. I purchased a "generic: thermocouple from the hardware store, but it appears this will not work because the ...
SPC-40 propane heater. Apparently they are out of business. It is about 12 inches long and has an electrical connector for two wires. You can pick a thermocouple up at your local plumbing supply store
...spc-40 heater i can not get it to stay fired up i press the fuel button and it does lite but after 15 to 20 i release button and it goes out what do i need to do to make it work again Ensure all your ...
spc-40 All Pro heater. it lights fine but when i release to gas button after 1-2 min. the heater will not stay lit. it stayed lite once and when i moved the heater it went out and will not stay lit. i
Question about All-Pro Heating & Cooling
...40-FAC heater will not ignite and run. The igniter has been replaced. What should I check next? I have tried for better tan 20 minutes to try and fire up my heater and it just wont fire and run. I ...
Heater cycled and shut off after hitting temp then about 40 mins later trigger and all that happened was the fan was running with NO ignition. I took it apart and it is getting spark. I cleaned nozzle
SPC-40 wont stay lit Had it for a year just. Problem just started. Will stay lit if I hold in the propane button Problem is either the thermocouple or the thermoelectric valve. I have one of these as ...
83 questions posted
Usually answered in minutes!
264 Questions
70 Questions
27 Questions
5 Questions
5 Questions