Thermador PG486GEBS Stainless Steel Kitchen Range "clock light oven" Questions

...light when the clock has broken. Temporary solutions: So I turned all the electricity to the cooker off and left it a while, when I turned it on still the same problem, but after about 2 hours it ...

light is off (oven door is closed).. Any help would be useful. thanks it sounds like the clock on the oven has been adjusted, if the clock has been adjust the fan will continue to "Cool Down" the oven

light no digital display nothing. Open the control panel to expose the clock/oven control. With a volt meter verify incoming voltage to the clock control. Check all wires for good contact. If it still

...light works Clock & Main control display issues - YouTube ? 4:44 https://www.youtube.com/watch?v=OmOocInxHOo Jun 28, 2013 - Uploaded by ApplianceVideo.com ... symptoms: Clock and display does not ...

fan and oven light work but the clock and oven do not work. wondering where to start. dhhj Replace the clock first(electric control) then test the oven it could be that it's why the oven does not work

...replace clock. You did not say whether the clock controls the oven; ie. oven does not work when clock is off. if so, replace clock. If not, ignore it unless you want to know the time from that

...clock goes back to flashing, the oven goes off. Disconnected the oven light and it started working again. But the next day same problem all over again. oven takes to long to heat, broiler works fine, ...

...Clock is set. Inner light works, fan works, just not heating up at all. This is electric oven with gas stovetops. The small oven works fine as does the gas range. Ohm out the burner element for ...

...not the clock did come on a few times with dim light and faded out 4/5 times now just burn ers work and not clock pad so cant even try to turn oven on It sound like the electronic oven control is

...clock will not light up. Typically, if the light has gone out on your control panel you would need to replace it in order to get the light back on. That screen is usually a digital LED and is unable ...