glass plate does not rotate on the bottom of the micro underneath the shield there is a small moter for turning the plate.. also if the plate and roller are not centerd correctly it will not turn ,.. ...
...unit was purchaced in June of 2011. Yes, take the rack out and recycle it. I do not know why these micro-wave company put racks in the micro wave ovens. You get some insulation on the inside the ...
Roper Microwave (mhe14xmq dec. 2003) trips breaker... Micro trips 15amp breaker under all different conditions. Electrician has checked electrical panel and the wire from micro to elec panel w/amp ...
micro does not turn on without external pressure we have a jvm1790sk01 - when we turn on the micro function it does not work - however if we press on the outer skin near display and even slightly ...
On the face of the microwave that displays the time, we just noticed ////////////along the bottom of the display under the time, we unplugged the microwave and tried to reset it, but no change ok if ...
Question about Daewoo Microwave Ovens
My Daewoo Micro Wave Was Spitting Flames Last Night Due To A Hole In The Wave Plate Hello Stephanie. Get a new filter and try again. Otherwise scrap the micro. It the filter plate rusted through, or ...
...tip the grill forward, lift out grill. Can't find the screws. Do you have to remove the entire microwave from the mounting?? Two problems found. The electrician that installed the micro. ...
Question about Whirlpool Microwave Ovens
what screws do I loosen to get micro out of bracket. I need to tighten the bracket holding the micro. What screws do I loosen to remove micro so I can get to bracket? THE TOP SCREWS IN THE CABINET
Installation of MM55541 Micromark Micro oven Can you tell me how much clearnce is required at the TOP of the micro, if it was put onto micro wall brackets 1 inch at the top for clearing the power cord
humming noise from control panel when pluged in control panel hums This usually means that a micro switch is faulty, check the micro switch and replace if faulty, there should be two micro switches
47 questions posted
Usually answered in minutes!
216 Questions
111 Questions
92 Questions
78 Questions
76 Questions