...replace the tub which has a bearing on it. Can it be repaired easily or is it a major task? How much is the replacement part? Thanks It is not a hard job to replace the tub. Just time consuming. I ...
...tub shell assembly. Normally need to replace the inner basket/shaft assembly and the outer shell with the tub bearing. check out for this link ...
...replace both tub shells and spin basket at a minimum. With parts and labor the repairs could cost $600-$800. If you have no extended warranty or service plan coverage, it may not be worth the effort ...
Question about Whirlpool duet Washing Machines
...tub or basket one in the same. Another salution is replace the seal and bearings, still a lot of labor. go to utube and a guy does to an LG, but the the repair is about the same for a Duet Definitely ...
Question about Whirlpool duet Washing Machines
...tub complete? The rear bearing is part of the back half of the outer tub. In some cases the basket will need replaced also if the shaft is scored. This is a big job. In most cases whirlpool will ...
Question about Whirlpool duet Washing Machines
...replace the bearing because the bearing is located in the rear half of the outer tub. This is an extensive project but if you still feel like tackling it, then goto YouTube.com and type in, "How to ...
...bearing but also tub etc.what todo? is there a recall on this model Here you go: Plan B: NOTE: Every production run I don't know from. Here are some notes: Duet washer started getting louder and ...
...replace the outer tub assembly (rear half has the bearings already pressed in place). You have to take most of the washer apart to get it out. It's a several hour job and it helps A LOT if you have ...
tub bearing that I have posted under my Tip and Tricks for instructions on how to disassemble and inspect the tub. The bearing may not be bad, but you still need to check to see if anything is binding
Question about Whirlpool duet Washing Machines
...be sure that the tub is moving around with out the outer tub moving....could be a motor controller problem.....but heres the part#s tub assembly#8181912 youll want to replace the seal too. ...
167 questions posted
Usually answered in minutes!
9,125 Questions
187 Questions
64 Questions
34 Questions