Whirlpool Duet GHW9150P Front Load Washer "kick plate removal" Questions

...the kick plate.  Note that not all front load washers have a kick plate so be sure that there is a prominent gap between the upper most region and the small lower region being the kick

three screws at the very bottom of the unit, pull the kick plate off. Tech sheet should be glued on the side of the unit in a plastic bag. Could also be glued on the back of the kick plate you removed

...kick-plate on and remove the plate. Then, on the lower right hand side you will see a filter on the drain pump. Remove the filter and clean it out. Have some towels handy! There will be some water ...

...kick-plate and support the front bottom with a wood block or similar, remove the front kick-plate's (3) retaining screws and swing the kick-plate up out of the way. The filter drain is behind the ...

...Duet washer? I don't see screws, just bolts that are almost at floor level. Those are them at the bottom. I think there are 3, one on each side and one in the middle then the kick plate pulls

whirlpool duet dront loader washer I keep getting the code F-1 you will have to remove kick plate to locate service info located at bottom.this should tell you what code means.

kenmore fornt load washer will not drain Remove the lower kick plate and clear the filter.

washer wont drain Remove the bottom kick plate and clean the filter.

...kick plate. Unscrew the two screws holding the kick plate in place, and gently pull off to remove. The kick plate is the lower outside cover of the washing machine. Place a small bucket under the ...