hose to the cold faucet. Turn the water back on and check that there are not any leaks. See the Installation Instructions for details. Is the water heater a distance from the washer? The distance from
Question about Whirlpool duet Washing Machines
...hook black hose back up. Note: if you take the clamp and push it all the way to the back and position the squeezers at the top. you can hold the hose on with one hand and are able to get adjustable ...
...hook into my sink faucet. The draining seems simple - put the drain into the sink and there you go. But, it's getting the water into the machine? I don't know the model - it's not apparent on the ...
...hose(s) both from the machine and the faucets. Check the ends of the hoses for the rubber washers with screens. You can remove them (if they are present) with a small flat-head screwdriver. After ...
...hose attaches. Mine was plugged almost solid with small pieces of rock and minerals, I have hard water. You can access the screen very easily by shutting of the hot and cold valves that supply water ...
Question about Whirlpool duet Washing Machines
...hose on both sides hot and cold. At the blue water inlet valve inside the connector there are small filtering screens (similar to an areator valve on your sink faucet) They may be clogged by sediment ...
...sink so I just turn the faucet down until the water is just a trickle. This works for me. If yours is attached to the wall you need to turn down the cold water tap. Its a pain in the ****, but I ...
...hook this line back up to the back of the washer. Any suggestions? Janie in Virginia My problem was a faulty filter in the head of the water supply line. After shutting the water off at the faucet, I ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions