...clear. What do I do now? try unplugging for a few min adn replug see igf that clears the computer, you didinbt by chance force the door open to addd a garment didi you??? if so the door lock has ...
Question about Whirlpool duet Washing Machines
...computer. Sometimes this is all that is required to clear momentary glitches. Last of all make sure you are using the correct detergent and pay attention to the concentration. If you are using 2X or ...
...off at the mains for 30 minutes in total to reset the computer and clear the fault display. Reconnect the mains power and turn the water supply back on. The machine should now operate
Question about Whirlpool duet Washing Machines
...clear. F28 is a serial bus error from the CCU (Central Control Unit) to the MCU (Motor Control Unit). All you need is some Electronics contact cleaner spray and a 1/4 inch socket to remove the top of ...
...continuing. Is that correct? Somebody help!!! Thanks. push pause cancel twice let me know if this clears the codes The official explanation is the door locks being bad the CCU computer being bad, ...
clear as well, is there anywhere else something could have gotten stuck? I have had this code three separate times. The first time service man came and cleaned out the filter. This is behind the lower
Question about Whirlpool duet Washing Machines
... I think that is the button for the Whirlpool Duet. If you look closely at the front panel, it will clearly state "Press and Hold for 3 Seconds to Lock" on one of the panel buttons (should be all the ...
Question about Whirlpool duet Washing Machines
...clear cycle memory You may have a problem with either your drive motor, motor control unit or main computer board (known as a CCU). PS Check for the obvious first. Make sure the drive belt is still ...
clear Unplug the washer and wait a few minutes. Then plug it back in and try it. The computer in the system should re-set. Our machine gave the DL and F code then would stop. I unplugged it and waited
...computer. In some cases, the washer will experience momentary "glitches" and can be cleared using this method. You may also want to inspect the door latch wiring to ensure all the connector plugs are ...
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions