2013 Hyundai Elantra GLS "bad ball joint noise turning" Questions

soon, a bad ball joint can cause the wheel to fall off. Typically a bad ball joint will squeek a little when you turn. Sway bar bushings are not so dangerous, they just make annoying noises over bumps

...noise can be either struts/shocks or ball joints.as for stiff steering can be either power steering. or ball joints.bad ball joints can make a banging moise and make it stiff when turnning the

and sway bar end links could be the problem,when you changed ball joints did you change both upper and lower ball joints?lower ball joints and control arm bushings tend to squeak loud when they go bad

Bad ball bearings are caused by a bad CV Joint, the joint bends causing the balls to click as they slide around in their cage windows and grooves. The noise is usually loudest when backing up with the

...bad? its not a loud screeching sound, but i would like to know what it is. if it was the cv joints it would do it when you drive it it seems like its the bushings in the a arms Ball joints. HAve your ...

...ball joint or bad strut. Depends on how the noise occurs and from where it comes from. Does it appear to come from one wheel or another? Could also be power steering linkage. OK, I would definitely ...

...bad ball joint. Tie Rod ends: You have changed the inner and outer tie rod ends so you are probably covered there. CV joint: The Joint is housed in a rubber boot. If you can feel the joint inside the ...

...ball joint?? how can i tell if either one is bad??? That usually is a worn CV joint. Go to a smooth surface like a parking lot, wind the windows down, and turn slow circles on full lock. If you hear ...

Ball joint or CV joint how do you tell which one is bad? It sometimes sounds like when you use a breaker bar on a stubborn lug nut in my steering column... When I turn my wheels to the left only. A ...

...is not moving at a stand still, it's going to be your ball joint's, bad news, if there OE there will be no grease fitting. New ones will come with grease fitting for future lube jobs on ball