Northern Tool 10,600 BTU Radiant Kerosene Heater "tools manuals" Questions

I bought a Reddy Heater 60,000 with no manuel Its fires up runs about a minute then shuts down. I can unplug the unit for about a minute and it will come on run a minute and I have to repeat this. ...

...tools. A vacuum cleaner with a hose, brush attachment, crevice tool and a can of compressed air with a straw nozzle (like you clean you computer with) is all you need. The compressed air with a straw ...

Procom ML300TBA Heater: Liquid or Gas I bought this heater from Northen Tool.com ( http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_200332747_200332747 ) and the description says ...

Set to automatic extinguisher I have a Kerosun radiant 10 kerosene heater and I have forgotten how to use it. I can't find the manual. It says to "set the automatic extinguisher by pushing the set ...

...fan blade forward or backward on the shaft is enough to make it light off. There are some specific tools reuired to get ACCURATE pressure adjustments. I'd suggest downloading a unit specific manual ...

Burning correctly I have, new purchase within the last 30 days, Dyna-Glo RMC-95-C6. Right after the setup I noticed that the suggest highest flame (height) could never be reached and even the ...

...are simple, just follow the instructions on the product, its basically all color coded. The only tools you should need is a small standard or phillips screw driver, and a level. Hope this

the heater runs 3 to 4 minutes then shuts down. i unplug the re plug and it does this again over an over. i just replaced the igniter a week ago. any ideas? A couple of things come to mind: Restricted

...follow the reverse of the above noted points. The whole work should not take more than 20 minutes. Tools required are: flat screw driver, need nose pliers. Be a little patient. Call me at ...

my pilot wont lite on my rheem quiet 80 , the fan comes on but the furnace wont lite up, anything i cant do to get the heat back on without spending any money? Check for any safety switches with ...