Patton PUH9000-U Heater "fan working" Questions

...fan not working (is free to move); element heats then shuts off. bypassed thermostat so it is wired direct and still no fan. any ideas? high limit not working , not letting fan come on try jumping it ...

...working well till last week, smelt funny smell (smelt electrical) and since then the auto fan setting on thermostat will not start fan. Furnace starts but stops without the fan running. Switch to ...

the fan. If this is damage, have it replace or repaired. If the connection is just broken, have it reconnected. This is the only defect, as the other component is still working. May this info help you

...FAN WAS WORKING. ANY HELP? You write "FUEL SPRAYING AND FAN WAS WORKING" If the fan was working, but the fan is not working now after replacing the whole kit, then something was installed incorrectly ...

...fan has stopped working I replaced my bathroom ceiling fan about a year ago and it was working perfectly until it stopped yesterday. The wall switch is making a sharp "click" sound now whereas before ...

...fan at the wall switch (or circuit breaker box). Wait a few minutes. Then turn on the power and within 30 seconds, press the reset button. You should be able to see a countdown from 5 to 0 on the ...

light fades out light on my new hunter ceiling fan when turned on high fades out but the fan and heater still work. When the light is on low it works as well I have got a new fan and it does the same ...

...working on the fan on position( may take several switches). Is there a miscommunication from the thermostat or is there a short of some sort in my fan not getting the message from my furnace? Well, ...

Im on my 2nd big buddy and both of them the fan has gone out, the first on went in a week, and this one last a couple of months. fans 1. oil the bearings,sae 30 or wd40 for places you cant get into. ...

have a dayton 3e240e heater and the fan does not work, pilot light works and main burner work as well. no fan. Had a similar problem where the fan wouldn't turn on but everything else worked. If you ...