flame lights but only stays on for about a minute then clicks and turns off. it could be safety feature because of too much carbon dioxide in the room. ventilate the room and you wont have the problem
wont go off. everything else works as it should check your thermostat, is the blower switch on check your t-stat wires and make sure your connections are the same as on the blower sounds like you have
...wont stay on Very easy fix. Get a piece of quarter in tube or a straw and blow out the pilot ods chamber. When it gets a small amount of dust in it then it thinks air is getting low in the room and ...
wont stay lit When I lite the pilot light and release the knob (after holding it down) the pilot light goes out. I replaceed the thermocoulper and it still does it. Whats up? I have an older Cozy room
Question about Vanguard Heating & Cooling
...wont stay lit when u release it to set the temp. ive double checked the gas supply and all is well there . i did get it to light once but after 30- seconds something clicked and it shut down .any ...
Question about Honeywell Heating & Cooling
...wont cool past 79 or 80 The unit is capable if it because I can also set it to 73 and it will got to 74 or 75, but never to 73. No matter what temperture the AC is set at its always 1 or 2 degress ...
...wont go on high only on low. Form what you have described it sound like the Oxygen Depletion Sensor(ODS) is clogged with dust, lint and/or pet hair. Therefore, the ODS reads the oxygen level in the ...
...wont turn on, and it comes up with e 13 help! E13 means the same thing for the gas stove as the fuel oil stove, No ignition. You could really have had no ignition or the computer may not have ...
185 questions posted
Usually answered in minutes!
192 Questions
46 Questions
39 Questions
