Durabrand DUR7 Portable DVD Player "lid pushes down" Questions

...lid, keep it pressed down. right next to it it a tiny button that detects whether the lid is shut. tape a little piece of folded paper onto it and then it thinks the lid is always shut. it just means ...

...lid the comes down on top of the DVD. When the DVD is in place and the lid is closed. The screen says that it is still open. I've pushed on all the areas to make sure there is connections. I can see ...

...lid is up. There is supposed to be a little plastic piece that pushes down a button that tels it that it that the door is closed that plastic piece is broken off. Look for it and glue a little piece ...

lid goes down the little plastic pointer does not properly engage the button that starts the DVD spinning when the lid is closed. If I try to push the button down manually with a pencil, the disc will

...lid and find the little bump that presses down on the switch. Find some way to build that up a little bit, maybe a few layers of fingernail polish, or a small felt sticker, or some glue. Once it ...

...lid swith down to simulate to unit it is closed. Turn unit on to see if the pick-up goes to the middle, tries to focus and the laser can be seen on the lens. If the laser is not present during this ...

...lid and find the little bump that presses down on the switch. Find some way to build that up a little bit, maybe a few layers of fingernail polish, or a small felt sticker, or some glue. Once it ...

lid inside the machine. Press Setup on the remote control. Move the menu selector down to Preferences and then press the Right arrow. Press 2, 1, 2, 2, 2 and then 5. Press Left arrow. Press Down arrow

...lid back, then lift it off. You'll see the "track" where the VHS tapes move forward, then down. Place a finger on each side of the track, and gently glide the tape back up and then forward, manually ...

...lid closes the button is pushed down and off goes the picture. Well little four-year-old fingers was fingering the button and it got stuck in the down position. I used a sharp tip to work it back to ...