Maxtor Personal Storage 3200 (U01E200) 200 GB Hard Drive "open case plastic" Questions

open the enclosure for maxtor 3200 this case was difficult to take apart, remove the two screws at the one end, then the case is held together with plastic clips they are fairly difficult to get open,

open case ,ximeta ndu10 120 external hard drive" How Do You Open The Case Without Damaging On the plastic sides of the case, near the back, there are 2 holes - one on each side. Inside these holes are

...open the case safely (without damaging it)? I have the Buffalo Ministation 120GB portable HDD, and I also have a 320GB notebook HDD lying around... I was wondering how can I open the Ministation's ...

seagate freeagent goflex case opening Case is by plastic clips. So use a thin screwdriver to go round the the gap to release the clips.

...open the case? My 1TB Seagate was connected to a lap top and fell off a desk. The USB port broke and is loose in the box. The unit will obviously no longer power up. I am interested in extracting the ...

open the case but do not see any screws, maybe it is a "one-way-only" assembly, something like "click-in" and thus cannot be opened again ? Get a couple of guitar picks. With the unit upside down, you

case open. Once open remove the 4 screws that hold the hold the 4 rubber pads on the drive. Also remove the very small screws that hold the metal case together then "carefully"slide the metal case off

open case? Just wondering if anyone can help me with this drive. I bought it 2 months ago and the other day it dropped on its side about half a foot and the usb connector inside the case just fell off

...open the case you'll see what I mean. One half of the case removes. The other half has the Harddrive attached to it. After you remove the case half, you will see a metal shield. There are two long ...

...open the casing. If yours is like mine then there probably are not any screws on the casing, it is held in with tabs. I pried it open on the side the product name is on, from the bottom of the