Pioneer VSX-516-K "receiver troubleshooting" Questions

How to troubleshoot pioneer vsx 1021 receiver I was given this receiver with it being stuck in the protect mode with the flashing mcacc light so it wouldn't turn on. When I bypass the auto protect ...

No display no tuner on nakamichi Sr-3a receiver if you have the proper tools to troubleshoot your device manually i can help you troubleshoot it.

...troubleshooting guide for your receiver can be found here. Is it freezing up after long periods of use which would suggest overheating. How do you have it plugged in? Perhaps the power supply is ...

...Receiver + 5.1 speakers). To solve this, try to follow "Troubleshooting" guide that came with your system. I followed it 2-3 times. In my final attempt, when system was not shutting down but stayed-n ...

...receiver junk? The protection circiuts detected false more likely in the audio power amp circuits. Turn off all the speaker outputs or disconnect all the speaker wires to see if the fasle gose away. ...

...receiver back on with nothing attached and the offpower mode came on again and system slill shut off. Can you help me It most likely has a bad channel in the amplifier circuit. This is a very ...

My right side speaker is on but very weak. I've troubleshooted and it isn't the speaker or speaker wire. What is wrong with my amplifier? Most likely there is a problem in the amplifier or filter ...

...RECEIVER TO A REPAIR SHOP ? NEVER USE MAXIMUM VOLUME FOR TROUBLESHOOTING. Turn the volume control to something medium. The errant switch, control or condition may change and you will suddenly release ...

...receiver. there are several factors that affects it, try some troubleshooting: and answer this questions: 1. During this event, what is the source of your INPUT audio signal? Have you tried to ...

Sound no longer comes through the speakers Receiver no longer delivers sound through the speakers Troubleshoot the "amp" section!