Pioneer GM-7200M Car Audio Amplifier "remote turn" Questions

...remote turn on switch set to on. The protect power light is green help! Can't figure it out U need to hook your remote wire to a wire that is power to it only when your switch is turned on remove the ...

...remote input or the amp will never turn off. A friend of mine had his remote wire shorted to ground once after he replaced his head unit. Turns out when he slid the new one into the dash opening he ...

what is rmt on the amp On most amps, rmt (remote) is a wire that connects to your stereo remote wire to the remote port on the amp. The remote wire turns your amp on when turning ignition on and turns

...remote turn-on terminal of the amp to make it switch off. This is generally done by connecting the remote turn-on terminal to the head unit's power antenna or system control terminal. When the head ...

...remote turn-on wire from the terminal on your amp. If that shuts it off then you can use either the remote turn-on output from your head unit, or any fuse at your fusebox that only comes on with the ...

...turn off with the remote wire removed, there is probably a short between the 12V+ and remote terminals. In that case, the amp is probably defective. If it is OK otherwise, you could still use it by ...

cant get my amplifier bass remote to work any help? there is a level for ur remote turn it all the way up an turn the remote down till u can turn it up a little

...remote turn on lead and the ground lead connected together. They should not be this way. The remote turn on lead should be connected to your head unit's remote turn on lead or a source that is ...

...remote turn on lead from you radio(most aftermarket radios use a blue and white or a blue wire for the remote turn on). This wire will send a 12v signal to the amp from the radio when the radio is ...

...remote turn on" lead, you should connect this to a 12 volt remote turn on lead from your head unit or you can wire it to a 12 volt source that turns on when the key is turned on to start the vehicle. ...