Technics SA-AX540 Receiver "low volume coming stereo speakers" Questions

...coming out of stereo Video is good but no sound Did you press one of the speaker buttons? Did your cat chew the speaker cords? Pressed the mute button? Turne the volume low before pressing any

...volume control knob with electrical contact cleaner. Twist the knob from low to high to make certain that all the workings are adequately lubricated. This should eliminate any interference that ...

low sound but nothing more than that. Is there anything I can personally do to try to fix this? If parts are needed for this fix about how much might it run? Thank You. Turn the volume down to about 1

...low volume, I tried moving the balance all the way over to the right speaker. The right speaker volume will not increase in volume but the left speaker will decrease in volume.Just to clarify, the ...

volume is low compared to background music volume on AVR-2808CI Could be a number of things. Most likely your surround sound mode. Some people dont like Dolby. Try to switch to 5 channel stereo. Other

...low impedance loading by the speakers; and shorts would be wiring issues or a speaker blowing up. You should be able to feel if it's hot. WHY is it overheating? Make sure it has sufficient ...

...volume up all the wire is propley conected it works fine for bout 10 mins then trips out my other amp 1000mark 2 is wired up and when i put speakers in that it works fine so i there has got to be ...

...volume.....What do u think? Generally speaking, an amp attempts to protect itself from heat, shorts, overloads and operator exuberance by refusing to turn on or stay on; or it may turn on but produce ...

...What could be the issue? Worked great, left on overnight at low volume. Can only hear fan now. No sound from speakers??????? Check resister across back of speaker........most likely burned

...low impedance loading by the speakers; and shorts would be wiring issues or a speaker blowing up. You should be able to feel if it's hot. WHY is it overheating? Make sure it has sufficient ...