...failure also. I read that this indicates that a new bulb is needed. I am thinking that something else is wrong. Any suggestions? I experienced the same thing, only to discover it was the ballast that ...
three blinking red lights I believe that is the flash code for Bulb Failure. Bulbs are available online and not so hard to replace yourself. Go to www.avsforum.com for additional info
...bulb problem but rather a Mainboard failure. This can unfortunately only be resolved by having it repaired or replaced. And it is expensive incase you were wondering. infact a color wheel issue. your ...
...input and some are wider than others. Steve, your issue is not the bulb... Sounds like you have a problem with either a ribbon cable from your main board to red LCD panel, or a main board
...bulb failure I had an original bulb fail on my projector. I replaced it and it worked for a day then when i powered the unit up, the color wheel and fan start up, but the lamp doesn't light. ...
Question about Mitsubishi Office Equipment & Supplies
...light bulb is not broke,looks good,tries to start but there is a zapping sound,like a spark plug,unit stopsv after failure to lite lamp,then it will start over again Light bulb is broke ...
Question about Office Equipment & Supplies
...The two red blinking lights indicate bulb failure. Replace the bulb and also thoroughly clean the cooling fan and vents to prevent future overheating which can shorten bulb life. Hope this ...
Question about InFocus Office Equipment & Supplies
...failure to srike lamp. bulb is less message reads failure to srike lamp. bulb is less than 200 hours used that ones are total ****... seems like lamp is broken .. my advice would be get a new ...
...failure. I had the same problem and the technician diagnosed as being caused by a faulty Ballast which he said caused the bulb to fail. He didn't test the bulb but his experience indicates that even ...
failure Lamp bulb and power LED indicators are both lit (red). I have replaced the bulb, but the result is the same. check the bulb is fully seated and connected. otherwise it could be the bulb firing
17 questions posted
Usually answered in minutes!
18 Questions
15 Questions
12 Questions
12 Questions
10 Questions
