stuck is your lid activator is not releasing. there are 2 reasons for this 1st- 1 or both activators are faulty. 2nd the lid activator control board is faulty, which is located under the bottom drawer
...1-drain hose kinked or plugged 2- drain pump failure 3- accumulation of debris in filters and causing the floater positioner got stuck if there is the flow of water through the drain hose it may that ...
...stuck on rinse at the end of any cycle with 1 min showing on the timer and wont clear? change the control module. im a old bosch tech. send me a 4thumbs post if this was helpful My Bosch EXXcel ...
...stuck in cycle exactly on 1/2 way main wash when the water is is comming in can i fix it myself? bunny, you don't say if this is a mechanical or electronic timer. If it is mechanical and you can ...
...stuck on 1 minute. Now I acnt get it to start on any programme. It starts up ok nut the timer doesn't advance at all! I checked the pump, that's ok and cleaned out the food filters, reloaded salt and ...
...stuck on 1 but then operated correctly for a few days until today. Got the same problem. Display stuck at 1.I checked the drain pump, was ok and resoldered one relay pin on the control board. Problem ...
...1 hr..wont clear or allow any other features unplug or turn off power . turn back try to program . if no luck / look for code on digital display . if no code replace the touch panel .. it has a stuck ...
...stuck on rinse at the end of any cycle with 1 min showing on the timer and wont clear? The water does not drain. I need Help module or drain pump need ed call 1-888-nyc-1055 they are pretty good with ...
78 questions posted
Usually answered in minutes!
112 Questions
85 Questions
75 Questions
59 Questions
67 Questions