Asko W660 "clips washing machines pipe work" Questions

...washing m/c stops after the wash cycle and is not going to rinse. the water remains in the tub. Check the pump for blockages. First unplug and drain the machine by hand as much as possible.You will ...

...washing machine wont drain. it gets to the drain cycle and stops. Check the pump for blockages. First unplug and drain the machine by hand as much as possible.You will have to tilt the machine to ...

pipe to the drain. These pipes are usually fixed with spring clips which you press to release (may need a plier here). Remove the pipe that comes to the pump from the drum.Check for items blocking the

...washing machine will not drain at all unabling me to open the machine door as it is full with water, i have tryed putting it on a spin to drain however it the quantity of water in the machine just ...

pipe to the drain. These pipes are usually fixed with spring clips which you press to release (may need a plier here). Remove the pipe that comes to the pump from the drum.Check for items blocking the

...washing clothes and after agitation the washer did not drain or spin. I took all the clothes and water out and turned the knob to the spin area and it does not spin. If I put the knob to the start ...

Clothes remain dripping wet after the wash cycle is complete. After running a load of clothes through a normal wash cycle, the clothes remain dripping wet. This happens with different cycle types such

...washing machine, and will goes as far down to 27 on count down and stops. it wont drain or do anything else. it just says on screen 27 and count down light is on. can you help me please found the ...

washing powder drawer & door, i have checked all filters,pulled all pipes off, (drawer pipe onto machine) i have blown water thru machine, water flows right thru to filter & comes out.. I have

...work, take the pipe from the wall socket and lay it on the floor for the water to spill out. The spin normally does not work when the outlet filter is clogged; if the filter is clean you should then ...