Asko W6761 Front Load Washer "knocking sound during spin cycle" Questions

knocking several months ago and then progressed to a high pitched sound when in the spin cycle. I manually turned the drum and heard and felt a bearing roughness. I lifted the drum assembly and felt a

knocking sound during spinning cycle it makes a knocking sound and now doesn't spin out the water is that a top load or front load washer? The sock trap is full. Look on the lower left square in front

...spin cycle-it is level sounds like the bearings have worn out,to check for this open door and lift inner drum up and down if you feel like a knocking sound then this will be the bearings have

...If the noise is a squealing or grinding sound, you are likely looking at a bad seal and bearing. If the noise is a knocking sound, it's more likely a suspension or out of balance condition. ...

...knocking; which does not seem to be directly related to the actual back and forth of the wash tub (doesn't seem to match the same rythum). The sound goes away during fill, or spin. I am about a year ...

...knocking sounds during spin cycle. Model ewf1087 Good Morning Friend, I understand your Electrolux washer, model# EWF1087, is making knocking sounds during the spin cycle. In researching your model ...

...knocking sound but seems to spin.I see 2 cluches and a plastic catch.All 3 look ok to me.any ideas? replace the balance springs from the bottom of the tub to the frame there weak and letting the tub ...

Knocking sound in the spin cycle off balance. I have a Magtag PAV2300. When it is in the spin cycle the tub goes off balance and has a knocking sound. What can I do about this. I have a 22 year old ...

...knocking noise My washer has started to make a loud banging sound during both the slow spin & fast spin cycles. The washer is level, clothes are balanced. it does this on every cycle now. The clothes ...

...be redistributed. Most likely, your pulley is coming off, my pulley mad that knocking sound for a year before the belt fell off and I had to address it. see the previous post on how to fix this