...down, if this is an older CRT TV please take note that the tube will hold it's charge for a long time but you should not need to go anywhere near this to while performing this task. Regards,
Question about Televison & Video
...CRT board on a Sanyo DS32424 Find the silver braided wire that surrounds the picture tube. Very bright silver, can't miss it. Attach the braid to a wire that has an alligator clip on one end. On the ...
Question about Sylvania Televison & Video
...crt holds up to 10,000 volts dc. it's not like a wall socket. dc voltage will knock you back hard. also keep in mind that i am in no way liable if you do this incorrectly, and any and all injuries ...
Question about Sony Televison & Video
CRT(Cathode Ray Tube) display and the voltage generated by the HT transformer is 33KV. Please don;t even get closer than six inches from that circuitry which you will bw able trace if you yourself try
...tube 'CRT' or more likely 'Capacitors' to which are drying out. These are like small little batteries that over time just don't hold their voltage charge anymore. If it's rated for 9 Volts DC it's ...
...CRT (picture tube) is holding a better than average charge and this is what we call "pre-glow" The noise that you hear, is that everytime you turn it on or just after it has been off for a while? If ...
...on the Deflection Board. It has the big red wire coming out of it going to the picture tube. Becareful with that. Some of them hold a nasty charge waiting to bite someone. Wont kill ya, but it
wire that plugs into yhe tube so DON'T UNPLUG IT FROM THE TUBE you will get a big charge and the fuse should be near the flyback and if it still dosen't work the the output IC is probley fried
CRT (picture tube). This is the high voltage anode, the CRT (even with the set off and unplugged) can still hold a substantial charge up to 30K volts!!! If that resistor is there check it to see if it
94 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: