Question about Samsung Refrigerators
...flap (located on the left hand door), on the lower of the three hinge points there is supposed to be a tension spring that will hold the flap in the open position when the door is open and also ...
Question about Bosch Refrigerators
...the top installation clips, hiding them. Where can I get that? The repair guy said that since there was no part # for it, he couldn't order it. door seals are not completely sealed. replace the
Question about LG Refrigerators
...this is the one with the ice maker), and replace the tab, or is it a molded piece of the door? Is there a way to repair it, without replacing the entire door? Unfortunately you have to replace the ...
...replace the skin of the door, or the door itself. When i first came across this issue at a customer's house, I was told then that the cost would be several hundred dollars. sorry to be the bearer of ...
Question about Maytag Refrigerators
...door opens and closes ? You need to replace the PCB located in the back of the refrigerator. Took me about 20 minutes after I got the part. Then you will have to program the code back into it. Costly ...
the cube door keeps flapping repeatedly and will not stop while the lights keep blinking on the front panel u have to replace the main board and program it
Replaced HV board on Maytag MFI2568AES fridge. Lights were flashing/ice door flapping...everything seems OK now except that 18 hrs later fridge/freezer cool but not nearly close to proper temp. ...
DOOR KEEPS FLAPPING OPEN AND CLOSED. i REALIZE THAT THE PROBLEM IS COMMON AND SHOULD BE FIXED BY MAYTAG. hOWEVER IS IT STILL GOING TO KEEP EVERYTHING COLD? Budd, if you want to stop the flapping until
Question about Samsung Refrigerators
flap to a short small screww you would drill into the plastic under the door.This lasts longer than the spring and when it gets tired,just replace with another elastic,lasts for years and works better
Question about Samsung Refrigerators
...door. It was on top of the hinge so it looked like a pivot pin. I found that this was the second hole for the spring. I pushed the end of the new spring up under the hinge and popped the broke piece ...
551 questions posted
Usually answered in minutes!
822 Questions
518 Questions
315 Questions
239 Questions
175 Questions