Maytag 24 in. MDBS561A Built-in Dishwasher "lock button" Questions

...button to lock this unit out you have to hold the lock button down for a few seconds until lock light comes on. lock button could also be a combination button with start button or some other button. ...

...Button Lock function: 1. Switch on the appliance. 2. Set a washing program. 3. Start the washing program. 4. Press Button Lock for approximately 5 seconds, or until the Button Lock indicator light ...

...most models, you have to push and hold the button(s) until the lock light goes out(usually about 3-5 seconds). That should disable the lock and the unit should operate normally. I hope this helps

...lock) button continuously for 3-5 seconds. That should clear the lock.Now you can use the controls normally. To re-enable the control lock, press and hold the control lock button continuously for 3-5 ...

...Lock button is on (top of dishwasher). I have pushed that top button for 3 seconds. The button on the top and the "L" then both blink. The button on the top then stays on and the "L" light goes off. ...

...a button or key lock. on the elite it is the airdry button. there is probably a lock icon by the correct one. hold this button for several seconds and the lock lite will go out and buttons will

...lock button is on, when i press any other button the lock button blinks 3-4 times and then go steady again, but nothing is going on with machine press and hold the lock button 5 to 10 sec or until it ...

...i unlock drawer hold the lock button in. There is a 2 stage lock. first beep locks the key pad. if you keep holding the lock button down it will lock the draw. Hold the button in for the second

...lock button(perhaps its the heated dry button) in for 3 secs???? sonds as if the CONTROL LOCK has benn activated( child lockout) My delay start light is blinking. If I push cancel it blinks, and lock ...

...If so hold the lock button until the light turns off. If you do not have a lock button, try the heated dry button or consult the manual to find out which button toggles the child lock. Good