Hunter 52" Ceiling Fan With Light And Remote Control "bulbs blinking" Questions

Ad

light blinks when turned on. I have changed light bulb with the proper wattage bulbs. hi, check is there is any loose contact in the bulb holder. its the only reason for blinking. ok

Ad

I have a Casablanca Fan & the lights are blinking? changed batteries in remote. changed light bulbs still blinking make sure the wattage in the bulbs are correct

Ad

...to control a Hamptoon Bay Ceiling fan and Light Kit. The kit came with two Compact Flourescent bulbs (60 Watt equivalent) and had special sockets to receive them (two nodes in the bulb fit into ...

Question about Hunter Dryers

1 Answer

...blinking, that would confirm it. If there is only one bulb - it could be a loose filament or a loose connection on the lighting circuit portion of the fan. If there are multiple bulbs and all blink - ...

Question about Hunter Dryers

1 Answer

bulbs are blinking Your bulb is damage, please replace it

Question about Dryers

1 Answer

...40w blinking of bulbs or super dim Are you using the correct wattage for the bulbs? Also could be the remote receiver going bad. Harbor Breeze is a low-end fan for Lowes. You get what you pay

Question about Hunter Dryers

1 Answer

...no idea of what your are talking about. I have seen this when the newer style lilght bulbs are installed with an older style dimmer. Try regular light bulbs and see if it solves the blinking

Question about Hunter Dryers

2 Answers

...blinking is caused by the watt governor to lights( its a small black box with slots in it ). just remove this box and wire direct. this should fix problem. Had this problem and removed the black box ...

Lights started flashing or blinking off and on. Sometimes it stops if left on a long time, but if turned off and later turned on it is blinking again. What's wrong? This is a remote controlled fan and

Question about Hunter Dryers

1 Answer

...blinking each time getting more faint until it is off again. What can I do? sounds like a weak connection at the wire nut. check all for good contact enough wire so they all touch and the nuts are ...

Not finding what you are looking for?
Dryers Logo

600 questions posted

Ask a Question

Usually answered in minutes!

Top Hunter Dryers Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Paul Bade

Level 3 Expert

1818 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Hunter Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...