Fisher and Paykel Fisher Paykel Intuitive Eco Washer IWL15 "brand new filling warm" Questions

Brand new unit(1 hour old), previous washer strong flow, runs strong direct through brand new hoses into bucket. Check to make sure the water lines are opened up all the way. They may just be sticking

...Brand new Maytag Centennial (just put it in yesterday). Makes thumping sound as warm setting alternately fills with cold water, then scalding hot water back and forth, back and forth. Any ideas? Call ...

...brand new washer. When the water turns cold, check the other hot water outlets in the house. Possibly the water heater is simply running out of hot water. If that's not it, I'd have the repairman ...

...brand new. I got one load out of it, now it will not fill. It will drain and spin. It has a water level sensor, so will not agitate because it will not fill. I have one cold water hose attached, the ...

brand new Whirlpool top loader with ATC (Automatic Temperature Control). (WTW5300VW model) When it fills with water, it pumps on and off, like pushing your foot on and off the accelerator. THis action

...brand new $173 timer control, same problem. Back to my second question, what does the temperature control work off of? What in that would cause this lack of operation? Not even close. Problem was a ...

...brand new lid switch and that did not help the problem. My washer is a Maytag top load with small, med, and large load size options. It has four temperature options, of cold-cold, warm-cold,hot-cold, ...

...new socks every couple of months. Try nappysan. As you have found out bleach is no good. In the "day" we used to use a "Bluing" Agent, see if you can get those, My solution is to use just a dot or 2 ...

...brand new Malber WD 1000. I was able to get the Wash cycle to work, but was stuck on how to get the dryer to work. Finally, I was able to figure it out, but the clothes aren't coming out dry. I put a ...

...new one. If that is not the problem, there is likely a problem with the valve that is controlled by the hot/cold knob. I am not familiar with your washer brand, but mine required quite a bit of ...