RCA HDTV 52" MDL # D52W23 has a bowed picture with red, blue, and green lines at the top The picture is bowed in from all 4 sides. We changed the convergence board and same problem. we do not have the
...RCA 52" projection won't come on. Before it shut down altogether, if would go on and off repeatedly. My TV man wants about $500 to fix it. John Burton I re-did the joints around the flyback ...
Question about Mitsubishi Televison & Video
...4 caps in dm boardhad blinking light of death before Projection sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When ...
...RCA rear projection tv, it takes three bulbs, red, green and blue. One night the tv shut off on it's own, when I turned it back on the picture was distorted, as if you were watching it in 3-D, but ...
...4 inches wide - almost looks 3D. the picture is sometimes a little shakey, a little blurry, then it is okay. the lines are consistent, the other symptoms are intermittent Projection TV sets need to ...
RCA D52W23: Only partial convergence menu. I can only access Autoconvergence, Red and Blue convergence options (not Level 1, 2, 3, etc.) in the service menu. The picture is only slightly off (i.e. ...
...4 UNDER THE SCREEN MENU. NOW IT IS NOT THERE. I TRIED TO GO INTO THE MAINTENANCE MODE AND NOW THE PICTURE IS SMALLER BUT THE RED, GREEN, BLUE ARE STILL OUT OF WHACK. PLEASE HELP. I too have the same ...
...4 sides. Projection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look ...
4. At power on the lamp turns on and off three times and then the unit shuts down with a red lamp LED (lamp error). Replace the Light Engine part # 939P977010 5. Lamp enable line at J14 pin 6 does not
293 questions posted
Usually answered in minutes!
269 Questions
227 Questions
221 Questions
201 Questions
196 Questions