Jetway 939GT4-SLI-G Motherboard "antec manual" Questions

...Antec tower? The motherboard is the Asus P4P800 SE ? Is this correct? If you have you're manual you can see what goes where on the board for front panel connector page. 2-31. (This diagram shows you ...

manual says is a PWR or CPU fault. I have a new Antec EPS12V 650 watt PSU installed and have simply connected the PWR connector from the front panel across pins 1 and 2 on the JF1 connector block. The

...antec 650w psu & a gigabyte HD6670 radeon graphics card. The requirements for the radeon is 1ghz of RAM & 400w psu, have 2 kingston 512 sticks on dimm_a1 & dimm_b1. Hi, from here you can ...

...antec 900) and nothing is turning on when i turn on psu except for a green light on motherboard so im pretty sure psu isnt dead and i have the firmwire as well as the frontiside connectors in the ...

...manual reboot, the machine powered back up but was followed by a series of beeps (two short and one very long) repeated five times. I still have no display and the computer does not seem to be active ...

Antec 550W p/s; Thermaltake CPU cooler. Hello from here you can download a manual and drivers:http://www.asus.com/Motherboards/AMD_Socket_939/A8NE/#downloadMy guees is that the windows disk is damaged

...Antec 500W power supply, 4GB OCZ Memory and I can't get the machine to power up. I have built several machines in the past, but I am stumped on this one. I am wondering if the F_PANEL connections are ...

...Antec PS., BENQ monitor. Have tried another video card , 2nd PCI ex16 slot, other video out connector on video card. no power on video although the cd rom & hd read lights flash on and off. You ...

...Antec 430 watt supply which should be enough. The only diff with this supply is it has a 20 pin power plug ... The manual says it should work .... Any Ideas??? Thanks in advance Dale G. Try using the ...

...Antec Sonata III case w/ Earthwatts 500W PS. When I try to boot the system the LED on the motherboard comes on the case fan spins and the HD spin up but there is no output on the monitor and the ...