Question about Marantz Audio Players & Recorders
...reciever. displayes error code v5. what does this mean and is there a quick fix? Error code POWV5 refers to a problem with the 5 Volt dc supply to the Digital/Audio PCB. If it's not a loose conection ...
...ag-v8525 av home theater receiver how do i resolve this problem Protect on any reciever usually means that it has reached its maximum capacity of volume (known as clipping) and at the reciever is ...
...mean the same as we might say "my left arm & my right arm? L&R just there to indicate where to put the speaker cables into the speakers and also into your reciever the reciever should have ...
Question about Pioneer Audio Players & Recorders
reciever is turned on in a few seconds the display shows "overload" and receiver shuts down. This means that one (or maybe more) of the amplifiers is shorted. Remove all speakers cables and try again.
...reciever is saying on the display screen protect. what does this mean? That means that the receivers' overload protection circuitry has been engaged. Depending on the number that is also displayed ...
...looks like a "P")lights up on the display. What does this P mean and how do I remedy the problem??? p mean protection mode, something is not right to send the reciever into protect mode, check ...
Question about Sony Audio Players & Recorders
The display shows PROTECTOR and there is no sound This means that the amp has detected a short, or low impedence and has shut down. check all the speakers for bad connections and shorts.
Question about Sony Audio Players & Recorders
...display shows when there is no sound signal sent to the reciever. There is no code to unlock. This is the reciever's way of telling you that there is no sound being sent to it from that input. Since ...
...reciever turns on "protector" flasher on display screen. What does this mean? Make sure none of the speaker wires are touching each other. If they are, it will short out the stereo which triggers ...
...my reciever stops working and displays F70 and says to turn off system. Whats could be wrong. F70 means Blown Internal Fuse change the internal fuse and that should solve the problem if not you may ...
38 questions posted
Usually answered in minutes!
135 Questions
96 Questions
101 Questions
78 Questions
82 Questions