Matrix Star SP200 Receipt Printer "printers cutting" Questions

Star SP200 (212FC) Parallel on LPT3 wont print but once unless you cycle power? 40 col printer parallel port LPT3 will only print 1 of anything ; then you have to cycle the printer power before ...

I have a Epson TM-U300 and use a generic printer setup for printing, the problem is I canot get it to cut the paper using the generic printer setup. Anyone know how to get it to cut, it cuts on ...

HOW DOES THE KNIFE GETS ALIGN SO IT WILL CUT? You have to tell it to cut. Your software has to know there is a knife attached to the printer, so it will know to cut. You have to program it to cut, ...

Why wont my star printer sp500 auto cut, it is an auto cut printer but it wont cut after printing receipt. Can anyone help? Did you check configuration if is the correct printer?

...printers is not automatically cutting the receipts Cutting is typically either a command being sent in the print stream from the computer or is a configuration setting in the printer to cut after ...

Hi, this printer has stopped cutting automatically. It will cut doing the print test but then will not when info is sent to it? It sounds like that the thermal printer is not set as the default ...

Reload Paper constantly shows up The message "Reload Paper" keeps showing up even after paper has been loaded, reloaded and even after a new roll of paper has been put on the spool. This printer is ...

unfinished printing cut-off The printing was not finished, it was cut-off by the auto-cut. Are you using the APD304e driver for your printer? It has option where to cut paper, if not you can download ...

Paper not cutting The printer has suddenly stopped cutting the paper. Does anyone have an idea what settings i need to change to make this work? Thanks in advance! Dipswitch 1, switch 1 should be on, ...

my brother printer cuts off the right margin right margin cut off how much if just border cutting from word then set the borders around the text