Alphasonik PSW112C Alpha 100 Series 12" 460 Watts Subwoofer Car Speaker "handle clip" Questions

...the speakers replaced? The panel is held down by screws and plastic clips. Make sure the arm rest/handle doesn't have any screws in it either. The plastic clips will pop out with enough force.

...subs.  Clipping the amp is when someone sets the gains on the amp to higher than the sub can handle.  Find this out before you buy new subs.  If not, you may have blown subs

...the sides. then normaly you would pull out on the bottom of the panels slighty making sure the door handle and other accessories or disconnected from the pannel. then lift up. it may be difficoult at ...

don't "clip" the sub. Kicker is good, but the comps can only handle so much before they start popping. This will heat up the voice coils quickly and cause them to fail prematurely. Hope this helps

........Rear left negative (+)Purple...........Rear right positive (-)Purple/black.....Rear right negative Hope this helps. how to insert wire to rj45 and how to handle and clip the rj45 with wire? ...

handle is stoping me from taking the panel off to see what size it is You need a window crank removal tool or...a really small pick tool to remove the horseshoe shaped clip that holds the window crank

...handle,and 1 on bottom side of door panel(bend down and you`ll see it.remove upper panel(triangle shaped).that model might also have a torx bit under plastic cover needing to be removed,,,lift UP on ...

...rear(see pic) unplug and remove 2. remove screw behind that panel 3. remove trim around the door handle, and screw behind that panel. 4. remove 2 screws at the bottom of the door panel 5. then

...handle will have screw also to help hold the door panel in place...if you have crank windows it takes a window crank removal tool....you will have to have this tool unless you have are familiar with ...

...whole door card off. To do this you need to remove the electric windows panel as well as the door handle and lock panel, from their disconnect them from their harnesses. Then remove all clips and ...