Crunch BlackMaxx BMX2250 2 Ch 1000W Amp Car Audio Amplifier "wire" Questions

...color codes 2004 Ford F350 Truck Car Radio Stereo Wiring Diagram Car Radio Battery Constant 12v+ Wire: Light Green/Pink Car Radio Accessory Switched 12v+ Wire: Black/Violet Car Radio Ground Wire: ...

...color codes. Likewise, the vehicle harness connectors are the same. Car Radio Constant 12V+ Wire: Blue/Yellow Car Radio Ignition Switched 12V+ Wire: Gray Car Radio Ground Wire: Brown Car ...

...in 70 chevy truck? I have a 1970 chevy truck and want to hook up a cdplayer but I can't find any wires for a power or speakers? Because of the year of the truck you will not have any wires ...

1957 Ford car radio installation. I need to identify speaker wires from hot and ground wires for a 1957 FoMoCo 12 volt radio [ Not installed.] There are two black wires on the left side of the case. ...

remote wire to factory radio how do i hook up my remote wire from my amp to my factory radio in a 2007 pontiac G6 If you have an electric aerial, you can tap into the wire to it. Usually a thinnish ...

...rca i have an old kenwood kac-801. It doesn't have rca outputs. i have an output adapter but the wire colors are different. i need the scematics or someones help take one of your door speakers and ...

when i start the car, sub light, amp and sub dont come on. You have connected it to the wrong power wire - one that is only active in service mode - first key position. You should draw a wire directly

...(1) sharing a common with another small awg yellow. Applying power to the main red/black power wires does not turn on the LED. Do I need to apply power to a wire other than the main red? which

Autotek Bass Thrust 44 Wiring I can't remember what the wires go to on the Autotek Bass Thrust 44. There is a plug that has a remote wire and speaker outputs but I don't know what they are. Help?!?!? ...

when i plug the remote wire in with the ground and power wire plugged in tight, i'll wiggle the remote wire and the heat and power safe lights flash on, but if i just leave the remote wire in the ...