Equator EZ 1500 Front Load Washer / Dryer "combo dryer hear" Questions

dryer combo and the problem is that when you push the start button, you hear an electrical buzzing but the dryer won't start. When you take the panel off it st I have a stackable Frigidaire washer

dryer combo? Problem draining front load washer/dryer combo. Hi. I''m assuming you are referring to a WD1000. To initiate the drain cycle: Rotate far right knob CLOCKWISE to Position 4. It may take 30

...dryer built-in 1200, Mod zjd . 125, and I do not know how to use it. HELP! Thanks, Cindy Hey, Just load the washer but do not over load. These combo washer dryers are strictly for smaller loads. You ...

...dryer? Or possibly each of my machines need something fixed? Thank you for any info! Noises are difficult to 'hear' in writing. The machine uses two motors, and it would be quite the coincidence if ...

...Combo Washer/Dryer Unit Model 4400. Does anyone know how to repair/replace the display and/or heating element please? I have an Equator Super Combo Washer/Dryer Unit Model 4400. The heating element ...

...dryer combo stackable unit the and the washer end isn't doing anything dryer works and checked the breaker, then we check the door switch and we can hear it click even when we use a screw driver to ...

...dryer combo. We wanted to try the dry cycle. The door lock light and dryer light come on, but nothing happens. I hear a click sound, like it wants to start, but doesn't. Also, the door does not lock. ...

...combo washer and dryer MODLE #WSM2700WBWWW and when I plug it into the socket it makes a buzzing noise for like 30sec. then I'll hear a click...I try turning it to the wash cycle but the water will ...

...dryer combo. The back is an all metal panel that is tacked into place and cant get it off. Any ideas as to how to get to the pump drain to replace? The P/n is 131661700 on the installation booklet. ...

...combo washer / dryer WD-4343RHD. For a gas dryer, conversion is to replace Nat gas orifice with LP one (the LP orifice has a air hole going cross ways through it) plus screwing the regulator blocker ...