...cover off of the drain pump, pull it out, and clean out all the coins, toys, hairpins, whatever else has been left in pockets and gone into the washer. When you screw the cover back on make sure the ...
...drain filter cover cap by turning the filter cover cap counterclockwise. Remove the filter and check the housing and pump impeller vanes for debris (see if you can move the pumps impeller by hand). ...
...drain pump cover. Once the cover has been opened, be careful when opening the drain pump, as there is always a little water left in the drain pump. Before you open the drain pump, place a small ...
Question about Washing Machines
...cover on Sanyo KM0912W drain hose seems to be plugged To remove the front cover on a Sanyo KM0912W air conditioner, follow these steps: Turn off the power to the unit by switching off the circuit ...
...drain cover and remove the blockage from the drain pump. and any additional hoses then reattach the hoses and then plug in after the 30 minutes is up then press the cancel button and test ...Test by ...
Question about Equator Washing Machines
...cover behind it. The drain pump filters seems to have some plastic flanges behind the metal cover to keep it from being removed easily. Do I need to disassemble the front panel somehow? Check the ...
Question about Kenmore Washing Machines
...drain from the washer. This is normally caused by a clogged filter in the pump assembly. On the front loaders the filter is behind the bottom cover below the door. The filter cover unscrews from the ...
...drain pump cover is. Completed the emergency drain of machine and thought it would be a simple task to remedy the prob by removing possible foreign bodies from the drain pump but can't find it at ...
some gentle force . Thanks OK..Got It! Your filter has disconnected from the Drain Pump. You need to have the machine's cover removed and re-attach the Filter back on to your Drain Pump! OKey...Dookie
...drain cover and remove the blockage from the drain pump. and any additional hoses then reattach the hoses and then plug in after the 30 minutes is up then press the cancel button and test ...Test by ...
18 questions posted
Usually answered in minutes!
69 Questions
57 Questions
14 Questions
13 Questions
6 Questions