remote wire hook up on the amp there should be a wire harness that clips into the side of the amp if you dont have the clip u can just use some end conecters and hook it up to the two pins that are on
remote wire The amps stay on when I turn the car off and also they cut off when I unplug them from the remote wire You have the REMOTE wire hooked to a constant +12V source. The remote wire is ...
...the best way to connect this to your amp remote wire is to simply go to your local halfords etc and get a little wire joining clip. then you can conect them. any other problems please ask ...
...CONECT 1ST TO THE BATTERYTHE TO THE FUSE RUN A SIFICIANT GAUGE POWER CABLE TO THE AMP.GET THE GOUND FROM A PART OF THE CHASSIS CLOSE TO THE AMP,ALSO SAME SIZE OR LAGER GAUGE WIRE.THEN YOU HAVE TO RUN ...
the amp turns on but wont put out any sound whats wrong? is the remote wire conected and speakers
Question about Phoenix Gold Car Audio & Video
...remote,p.con, or antenna. and its usually the smallest wire connector located by the power and ground wire. this wire goes to the solid blue wire coming out of the deck. you can conect the wires ...
...remote wire from my radio to different wires but it either doesn't work or still makes the noises. And everywhere i look someone says its a bad ground and i re grounded my amp in a new spot and it is ...
4 questions posted
Usually answered in minutes!
3 Questions
3 Questions
2 Questions