Question about Infinity Car Audio & Video
...crossover mode switch on the front channel is set to low pass or high pass. Have'nt fixed that yet cause when I got the amp and put power to it the clip and protect lights would flash back and forth. ...
Channel switches enabled. 5) Replace your RCA cable/s with known working RCA cable/s from the Source/Head Unit to the Amplifier/s. 6) Check your Head Unit settings; make sure the Bass is turned up and
...The Stats: RECIEVER: Originally, I had a Pioneer Premier DEH-P560MP Then, I temporarily replaced it with a Dual XDM6810 with Preamped RCA outputs. AMPLIFIER: Mosfet, Bridgeable,
replace the amp if its going to do the same thing.Thanks if anyone can save the trouble. If you know how to use a multimeter, you can test the amp this way: -unhook the subs -hook up a cheapie speaker
...channel amp powering my four door speakers. Everything in my system was working fine for a couple weeks after I got it installed, but then my subwoofers started to make a clicking noise and slowly ...
...channel to find abnormalities. Who ever is having the problem with the crossovers i have the same problem here altho i have found out the cause ... my amp was mounted upside down and started playing ...
...crossover module, i get a rumbling sound and heavy pops from the speakers. If i pull the RCA wires off, the rumbling stops, but if i attach an RCA to the White (L) input, i get some sound, BUT if i ...
29 questions posted
Usually answered in minutes!
174 Questions
102 Questions
72 Questions
42 Questions
48 Questions