...set up 4 digital lines on a Polycom SounPoint 550 with RingCentral.com VOIP service, the lines are registered on the phone, the problem is that the phone is only showing 1 line, the first one, would ...
Question about Polycom IP Computers & Internet
Polycom IP 501 won't reset to default when using MAC address as password I've tried to reset the default on the Polycom 501 and it won't allow me to use the MAC address as the ...
Question about Polycom IP Computers & Internet
...me untill a few seconds have passed. Thanks in advance You've got an IP issue somewhere in your setup. It sounds like the call is being lost and then the phone is querying the DNS server to find ...
for a phone whose extension is 2704 If you are not using a network-based configuration, the phone's settings can be changed via the phone's internal web server. Open a web browser window and enter the
...seconds until reboot" simply means that the computer isn't getting an IP address from your router. Setting up your router is another entirely separate topic. This is pretty simple though, one of ...
...set up to load it's configuration file from a ftp or tftp server and it cannot find the file or server location. If the phone is supposed to do this, please check that the ftp or tftp service is ...
...set the following appropriately. IP address, Subnet address, default gateway, ICP controller address, TFTP address, VLAN ID, VLAN priority, DiffServe Value, DNS address. Normally it is not necessary ...
...set the IP address of the default gateway for the network to which the switch belongs, type ip default-gateway gateway, where gateway is the IP address of the default gateway. Press <Enter>. To ...
...set, the address above are the default "industrial" addresses 1)So, on your side you have at first to configure your PC with address " 192.168.1.6" 2)Then start your IpTouch in industrial mode: - IP ...
...(this will unlock the configuration) + Network + menu under number "33" - erase the configuration. Then the phone configuration will be erased. Also you can manually set IP address and TFTP ...
62 questions posted
Usually answered in minutes!
7 Questions
13 Questions
9 Questions
5 Questions
1 Questions