Lanzar VIBE266 Car Audio Amplifier "amp protection" Questions

Ad

Question about Jensen Car Audio & Video

2 Answers

...amp, protection will kick in. Also, check for over voltage, too much volts can also trigger protection. Check your speaker wires for short. If some of the wire strands are loose and touching each ...

Ad

Question about Car Audio & Video

1 Answer

Amp in Protection - Troubleshooting - Basic Car Audio ... www.bcae1.com/.../troubleshootingbasicsampinprotect.htm Some simply shut down and the power light will not illuminate when in protect mode. If

Ad

Question about Nitro Car Audio & Video

3 Answers

...amp goes into protection mode. If the amp enters into protection mode the amp has components that have failed or have been damage by having the radio volume up too high. I have bought several amps ...

Question about AudioBahn Car Audio & Video

2 Answers

...again. If you still have a protection light your amp is faulty. Hopefully you have warranty . Please check speakers impedance .A thumbs up would be greatly appreciated if this answer is helpful to ...

Question about Sony Car Audio & Video

2 Answers

...amp is blown or is there any thing else that I should try? Protection Circuit is bad. It needs to be serviced. If all speaker wires are disconnected and it's still in protection, it's got a problem. ...

Question about DHD Car Audio & Video

3 Answers

Why does my amp stay in protect mode? When I hook my amp up and give it power it stays in protect mode. The most common reason an amplifier goes into or remains in protect mode is shorted output ...

Question about Autotek Car Audio & Video

2 Answers

...amp does not go on protection only because of wiring or power source problem , but also and mainly when there is an internal fault. Protection is started whenever an out-of range voltage value is ...

Question about Car Audio & Video

1 Answer

...protection LED remains lit without remote voltage applied, the amp may have other problems. Does the protection LED light with no speaker wires connected to the amp and no RCAs plugged into the

Question about Dual Car Audio & Video

1 Answer

...light amp is bad and if you have no protect light continue to hook up each speaker one by one while amp is on till you get a protection light and that speaker would be the source of your ...

amp, protection light comes on and thats it. Whats the problem? Two things, a problem with the speakers, or the amp is toast. If there is a short is the speaker, wire touching, bad voice coil, the amp

Not finding what you are looking for?
Lanzar VIBE266 Car Audio Amplifier Logo

34 questions posted

Ask a Question

Usually answered in minutes!

Top Lanzar Car Audio & Video Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66845 Answers

Are you a Lanzar Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...