asking where to set the crossovers? If so, for 10" subs set it to Low Pass (LP) at around 110Hz, for 12" subs, set it to about 80Hz, for speakers 6x9 and smaller set to High Pass (HP) around 80-120 Hz
...probably have ONE of the speakers wired out of phase. If the speakers are wired correctly, you may have the crossover set to high pass instead of low pass. Let me know if you have any other
...set to LPF (low pass filter), and the gain turned up? Many things can be wrong, but the fact that there is anything coming out of the subs is a good thing. Start at the beginning - Head unit, then ...
Question about Infinity Car Audio & Video
...Low-Pass Crossover: The low-pass crossover frequency can be varied from 50Hz to 120Hz for a seamless transition between the output of this unit and that of the other speakers in the vehicle. The ...
...gain about 1/2 way up and the bass about 1/4 of the way up. If you have a crossover knob, set it to the highest frequency available, since the low pass will filter all the high frequencies out
...crossover set to around 80-100Hz. Even then, I would not expect very much bass. 50 watts per channel at 4ohms or 75 watts per channel at 2ohms is barely enough to move the cone of a typical 10" sub. ...
26 questions posted
Usually answered in minutes!
31 Questions
11 Questions
12 Questions
9 Questions