Question about Princeton Digital VL Computers & Internet
power supply plug to the computer is + and whiich is -. Is the + the inside : or the outside C? I want to use a generic power supply and I want to hook it up correctly. OK, usually, the Center, PIN is
Shack Newark Electronics and MCM. Try input from another device to the same input using the patch plug Lap tops do not put out much power and the Receiver may not get enough signal to play effectively
...pressing the power button, if you have a meter check that the adapter measures 12V. If it does, check the mainboard capacitors and diodes and the inverter, follow the voltage from the adaptor
power source for the speakers attached to it, look for a pin port connector on the combo monitor, either in front, sometimes behind where all the other cables plug into, or, just plug your head phones
Question about Princeton Digital VL Computers & Internet
...power cord for it. found a 12v 5a online but dont we need a 12v 4a like it says on the back of the moniter? the serial number wcce2303231 please help us, thanks for any help you may provide. take it ...
...VGA cable 3) Press the up arrow at the same time you power on the LCD monitor. 4) You will see a message "RESET EPROM" 5) Power off the unit 6) Plug in your VGA cable 7) Turn the power on. ...
...power cord, wait 10-15 minutes then plug it pack in, the monitor would come up. Any ideas? if monitor is gave no siganl .Firstaly Check monitor Signal Cable For connected of ur system vga port. if ...
...power switch so have to unplug and wait for it to shut down, plug it back in and it works fine. Suggestions? Failing DC filter caps, just like the rest of other monitors: ...
Question about Princeton Digital VL Computers & Internet
...Power off the unit 6) Plug in your VGA cable 7) Turn the power on. Hold the menu button down long enough and it should unlock, if it unlocks and then immediately locks back up then you have a main ...
Question about Princeton Digital VL Computers & Internet
...power supply plug from the display and it will go out. If you are referring to the display itself, and not to the power supply, then it is a matter of tracking down the issue. Did you make any recent ...
45 questions posted
Usually answered in minutes!
82 Questions
59 Questions
27 Questions
23 Questions
11 Questions