Harman Kardon SoundSticks II Computer Speakers "circuit board" Questions

...skills and access to a oscilloscope, you can trace the signal on the circuit board. The suspect components to look for would be around the connectors for the power supply to the circuit

...circuit board. that is why when you turn up the volume it turns off because it produces vibration enough to shake the circuit board which has a loss connection. 1. Prepare the following tools: * ...

...circuit board. my question is, where should I put the specific wires into its specific location on the board? do you guys know where I could find the circuit diagram? thanks Well Friend, What is the ...

...circuit board on the razor Mako 2.1 subwoofer? How do I remove the cover from the Razor Mako 2.1 system to access the circuit board to replace the capacitors? I have removed all the screws from the ...

...board will be a part of the panel itself, and will be a built-in type inside the LCD panel. If so, they can't be replaced. In this case; a panel replacement is the only repair. For some other models, ...

...circuit board (speakers, battery, volume knob, led light, NFC antenna and mic). Four screws and double-sided tape hold the circuit board to the plastic casing.

The mic is attached to the ...

...circuit board in the sub. you have to take the sub apart and get the protective metal cover off the circuit board and un solder the old one. new fuses are found at radio shack they call for a 5a125v ...

...circuit board. You will need a long shaft #1 Phillips screw to separate the speaker with the power switch. 1 . . 2 contacts 3 & 5 and 4 & 6 will be soldered together 3. . 4 solder a wire from ...

replace main power circuit board I need to find a replacement circuit board - any help? Try eBay for replacements. Good prices.

...circuit board in the oppoosite speaker. Can anyone assist? It osn;t the wiring as I checked that back to the pin co I tested the speaker and it still works. The problem seems to stem from the little ...