Fisher and Paykel 24 in. DD603H W Built-in Dishwasher "problems rotor motor" Questions

...rotor froze in motor I replaced the rotor a week ago and now the motor is froze and the rotor will not come out I pulled the rotor apart and tried to turn the rotor shaft with no success. I assume ...

...motor has already been replaced , then either the hall sensor that detects the rotation is not working, the rotor is jammed, the control board is defective, or there is a wiring problem.• Foreign ...

...problems Without the model its hard to really give a detailed answer but I can tell you this. Fisher Paykel dishwashers if I recall dont actually have drain pumps. They have what they call motor ...

...motor rotor cavity. Follow instructions in your user guide to clean the filter plate. At this point you can take the rotor out and clean the cavity. The rotor can be pulled out carefully without ...

...spinning so washing is incomplete Hi If the rotor is not spinning then the issue is with the motor or rotor that should be replaced. Hope this helps...please post back for further assistance. ...

...rotor/motor or the sensors, the following notes should give you guys something to check and see which of these has failed.. Error Code - F2 Which LED - Delicate LED Reasons - The motor has not been ...

...problem still there, then take the motor rotor out and clean the rotor cavity and the channel between the drain sump and rotor cavity. Please rate this solution if it helped otherwise post a

motor/rotor/blade, Replace the sump assembly, or Replace the main Power Control Board. If your motor was making in knocking sound before this error, then your issue is probably the motor sump assembly

Hi, I have an ASKO 1253 which is working fine except that the rotors aren't spinning anymore. I have taken the trays out and the rotors off to check for blockages/obstructions but they are fine. I

rotor. you need to take the lower spray arm off and take part of the motor apart. there are 4 screws holding the filter on and then 1 or 2 more screws down in the motor holding other plastic pieces on