Question about Fisher and Paykel Dishwashers
...DishDrawer® water supply on. 2 Ensure the spray arm can rotate about the center, and if the DishDrawer® is full of water, it will need to be emptied manually. 3 Call your Authorized Service ...
dishdrawer for 8 years and it has never completely worked. I would get a U3 code on the top drawer intermittently. I have had my drains rerouted twice, LP - HP reset, service men replace the back flow
...water in the filter basket of the dishdrawer, I have watched the draining process when itgoes to error F1 and there seems to be a cycle of draining then pushing the water back through again. I have ...
...water has arrived at the bottom board. you can unplug the dishdrawer, remove the bottom drawer and dry the board at the bottom, maybe with a hair dryer carefully. this will reset the fault, but this ...
Question about Fisher Paykel Dishwashers
After a cycle the dispenser is filled with water. The dishes are clean, the detergent is gone, but there is water filled in the dispenser. Thanks! There is a small drain hole in the bottom of the ...
Question about Fisher and Paykel Dishwashers
...dishdrawer, its making noises and both drawers won't open Flood Pan alert Troubleshooting an F1 Error in a Fisher & Paykel Dishwasher https://www.hunker.com > ... > Dishwashers The F1 fault code ...
...dishdrawer - U3 error. Stops washing about 5 minutes into the cycle. when you start the unit let it run for a minute then pause it before it starts to fill and check to see if it's drained it's water ...
Question about Fisher and Paykel Dishwashers
...dishdrawer model number and have been through a number of the user manuels but cannot find the answer in them. There are a few reasons for U3 to appear. One that is most common is due to water not ...
Question about Fisher and Paykel Dishwashers
...Dishdrawer overflowing problem. Bottom drawer works fine,its the top drawer we are having problems with. After it has finished filling and changes into the wash cycle it floods. The water pours out ...
...dishdrawer after cycle. it is a single drawer. it is not displaying an error. how do we get the water out? Hi, I need to know which model you have, so I can walk you through this. Or close drawer, ...
955 questions posted
Usually answered in minutes!
201 Questions
174 Questions
104 Questions
87 Questions
68 Questions